Contact Us





Galvanised Malleable Iron

Galvanised malleable fittings are one of the most common types of pipe. Typically, galvanised fittings are cast iron with a galvanised finish. This galvanised finish leaves these fittings more durable than general steel, with high ductility and will also provide additional resistance to corrosion.

These fittings are ideal for use in a variety of applications and pipework systems. This includes water, compressed air, central heating, sprinkler systems as well as both propane and natural gas. These fittings are suitable for both residential and commercial uses.

Each fitting is threaded up to the equivalent BSP standard available unless otherwise stated. Pipe is supplied threaded at each end but will require threading if cut. Joints need to be sealed with PTFE tape. Working pressure up to 25 bar.

Waterline Products have a wide range of galvanised fittings in sizes ¼” to 4”. Larger sizes may also be available. Should you need a size or fitting that we do not have available on our website please contact us and we may be able to source this for you.

 

Sort By:
Show:
Display: List Grid
  • 2" Galvanised Backnuts
    This galvanised backnut can be used for joining pipes and other components. This fitting has been manufactured from galvanised malleable iron, designed to be durable, high ductility and corrosion resistant. Please note: When measuring be sure to minus approximately ¼” to find the BSP..
    Ex Tax: £3.21 £3.85
  • 2" Galvanised Barrel Nipples MxM
    This galvanised barrel nipple has two male threads for joining pipes and other components. This fitting has been manufactured from galvanised malleable iron, designed to be durable, high ductility and corrosion resistant. Please note: When measuring be sure to minus approximately ¼” ..
    Ex Tax: £12.44 £14.93
  • 2" Galvanised Bend 90 FxF
    This galvanised 90 degree bend has two female threads for joining pipes and other components. This fitting has been manufactured from galvanised malleable iron, designed to be durable, high ductility and corrosion resistant. Please note: When measuring be sure to minus approximately ¼&rdqu..
    Ex Tax: £19.98 £23.98
  • 2" Galvanised Cross FxFxFxF
    This galvanised cross has four female threads for joining pipes and other components. This fitting has been manufactured from galvanised malleable iron, designed to be durable, high ductility and corrosion resistant. Please note: When measuring be sure to minus approximately ¼” to fi..
    Ex Tax: £20.40 £24.48
  • 2" Galvanised Elbow 45 FxF
    2" GALVANISED ELBOW 45 FXF ..
    Ex Tax: £9.51 £11.41
  • 2" Galvanised Elbow 45 MxF
    This galvanised 45 degree elbow has one male thread and one female thread for joining pipes and other components. This fitting has been manufactured from galvanised malleable iron, designed to be durable, high ductility and corrosion resistant. Please note: When measuring be sure to minus approxi..
    Ex Tax: £15.75 £18.90
  • 2" Galvanised Equal Tee FxFxF
    This galvanised equal tee has three female threads for joining pipes and other components. This fitting has been manufactured from galvanised malleable iron, designed to be durable, high ductility and corrosion resistant. Please note: When measuring be sure to minus approximately ¼” ..
    Ex Tax: £11.91 £14.29
  • 2" Galvanised Flanged Plug
    This galvanised flanged plug has one male thread for joining pipes and other components. This fitting has been manufactured from galvanised malleable iron, designed to be durable, high ductility and corrosion resistant. Please note: When measuring be sure to minus approximately ¼” to..
    Ex Tax: £4.05 £4.86
  • 2" Galvanised Hex Cap
    This galvanised hex cap can be used for joining pipes and other components. This fitting has been manufactured from galvanised malleable iron, designed to be durable, high ductility and corrosion resistant. Please note: When measuring be sure to minus approximately ¼” to find the BSP..
    Ex Tax: £5.01 £6.01
  • 2" Galvanised Hex Nipples
    This galvanised hex nipples has two male threads for joining pipes and other components. This fitting has been manufactured from galvanised malleable iron, designed to be durable, high ductility and corrosion resistant. Please note: When measuring be sure to minus approximately ¼” to..
    Ex Tax: £6.30 £7.56
  • 2" Galvanised Plain Plug
    This galvanised plain plug has one male thread for joining pipes and other components. This fitting has been manufactured from galvanised malleable iron, designed to be durable, high ductility and corrosion resistant. Please note: When measuring be sure to minus approximately ¼” to f..
    Ex Tax: £4.40 £5.28
  • 2" Galvanised Round Cap
    This galvanised round cap can be used for joining pipes and other components. This fitting has been manufactured from galvanised malleable iron, designed to be durable, high ductility and corrosion resistant. Please note: When measuring be sure to minus approximately ¼” to find ..
    Ex Tax: £5.01 £6.01
  • 2" Galvanised Sockets FxF
    This galvanised socket has two female threads for joining pipes and other components. This fitting has been manufactured from galvanised malleable iron, designed to be durable, high ductility and corrosion resistant. Please note: When measuring be sure to minus approximately ¼” to fi..
    Ex Tax: £6.72 £8.06
  • 2" Galvanised Straight Union FxF
    This galvanised straight union has two female threads for joining pipes and other components. This fitting has been manufactured from galvanised malleable iron, designed to be durable, high ductility and corrosion resistant. Please note: When measuring be sure to minus approximately ¼&rdqu..
    Ex Tax: £23.82 £28.58
  • 2" Galvanised Straight Union MxF
    This galvanised straight union has one female thread and one male thread for joining pipes and other components. This fitting has been manufactured from galvanised malleable iron, designed to be durable, high ductility and corrosion resistant. Please note: When measuring be sure to minus approxim..
    Ex Tax: £27.12 £32.54
  • 2" Galvanised Union Elbow FxF
    This galvanised 45 degree union elbow has two female threads for joining pipes and other components. This fitting has been manufactured from galvanised malleable iron, designed to be durable, high ductility and corrosion resistant. Please note: When measuring be sure to minus approximately &frac1..
    Ex Tax: £31.77 £38.12
  • 2" Galvanised Union Elbow MxF
    This galvanised 45 degree union elbow has one male thread and one female thread for joining pipes and other components. This fitting has been manufactured from galvanised malleable iron, designed to be durable, high ductility and corrosion resistant. Please note: When measuring be sure to minus a..
    Ex Tax: £34.92 £41.90
  • 2" M X M 16BAR  100 MM Galvanised Barrel Pipe Nipple
    This galvanised barrel pipe nipple has two male threads for joining pipes and other components. This fitting has been manufactured from galvanised malleable iron, designed to be durable, high ductility and corrosion resistant. Please note: When measuring be sure to minus approximately &frac1..
    Ex Tax: £8.43 £10.12
  • 2" M X M 16BAR  1000 MM Galvanised Barrel Pipe Nipple
    This galvanised barrel pipe nipple has two male threads for joining pipes and other components. This fitting has been manufactured from galvanised malleable iron, designed to be durable, high ductility and corrosion resistant. Please note: When measuring be sure to minus approximately &frac1..
    Ex Tax: £146.70 £176.04
  • 2" M X M 16BAR  120 MM Galvanised Barrel Pipe Nipple
    This galvanised barrel pipe nipple has two male threads for joining pipes and other components. This fitting has been manufactured from galvanised malleable iron, designed to be durable, high ductility and corrosion resistant. Please note: When measuring be sure to minus approximately &frac1..
    Ex Tax: £10.35 £12.42
  • 2" M X M 16BAR  150 MM Galvanised Barrel Pipe Nipple
    This galvanised barrel pipe nipple has two male threads for joining pipes and other components. This fitting has been manufactured from galvanised malleable iron, designed to be durable, high ductility and corrosion resistant. Please note: When measuring be sure to minus approximately &frac1..
    Ex Tax: £21.93 £26.32
  • 2" M X M 16BAR  1500 MM Galvanised Barrel Pipe Nipple
    This galvanised barrel pipe nipple has two male threads for joining pipes and other components. This fitting has been manufactured from galvanised malleable iron, designed to be durable, high ductility and corrosion resistant. Please note: When measuring be sure to minus approximately &frac1..
    Ex Tax: £180.45 £216.54
  • 2" M X M 16BAR  180 MM Galvanised Barrel Pipe Nipple
    This galvanised barrel pipe nipple has two male threads for joining pipes and other components. This fitting has been manufactured from galvanised malleable iron, designed to be durable, high ductility and corrosion resistant. Please note: When measuring be sure to minus approximately &frac1..
    Ex Tax: £26.55 £31.86
  • 2" M X M 16BAR  200 MM Galvanised Barrel Pipe Nipple
    This galvanised barrel pipe nipple has two male threads for joining pipes and other components. This fitting has been manufactured from galvanised malleable iron, designed to be durable, high ductility and corrosion resistant. Please note: When measuring be sure to minus approximately &frac1..
    Ex Tax: £29.25 £35.10
  • 2" M X M 16BAR  250 MM Galvanised Barrel Pipe Nipple
    This galvanised barrel pipe nipple has two male threads for joining pipes and other components. This fitting has been manufactured from galvanised malleable iron, designed to be durable, high ductility and corrosion resistant. Please note: When measuring be sure to minus approximately &frac1..
    Ex Tax: £36.90 £44.28
  • 2" M X M 16BAR  300 MM Galvanised Barrel Pipe Nipple
    This galvanised barrel pipe nipple has two male threads for joining pipes and other components. This fitting has been manufactured from galvanised malleable iron, designed to be durable, high ductility and corrosion resistant. Please note: When measuring be sure to minus approximately &frac1..
    Ex Tax: £43.20 £51.84
  • 2" M X M 16BAR  40 MM Galvanised Barrel Pipe Nipple
    This galvanised barrel pipe nipple has two male threads for joining pipes and other components. This fitting has been manufactured from galvanised malleable iron, designed to be durable, high ductility and corrosion resistant. Please note: When measuring be sure to minus approximately &frac1..
    Ex Tax: £3.84 £4.61
  • 2" M X M 16BAR  500 MM Galvanised Barrel Pipe Nipple
    This galvanised barrel pipe nipple has two male threads for joining pipes and other components. This fitting has been manufactured from galvanised malleable iron, designed to be durable, high ductility and corrosion resistant. Please note: When measuring be sure to minus approximately &frac1..
    Ex Tax: £73.14 £87.77
  • 2" M X M 16BAR  60 MM Galvanised Barrel Pipe Nipple
    This galvanised barrel pipe nipple has two male threads for joining pipes and other components. This fitting has been manufactured from galvanised malleable iron, designed to be durable, high ductility and corrosion resistant. Please note: When measuring be sure to minus approximately &frac1..
    Ex Tax: £5.07 £6.08
  • 2" M X M 16BAR  80 MM Galvanised Barrel Pipe Nipple
    This galvanised barrel pipe nipple has two male threads for joining pipes and other components. This fitting has been manufactured from galvanised malleable iron, designed to be durable, high ductility and corrosion resistant. Please note: When measuring be sure to minus approximately &frac1..
    Ex Tax: £7.08 £8.50
  • 2" x 1/2" x 2" GALVANISED REDUCING TEE FXFXF
    2" x 1/2" x 2" GALVANISED REDUCING TEE FXFXF..
    Ex Tax: £13.62 £16.34
  • 2.1/2" Galvanised 90 Elbow FxF
    This galvanised 90 degree elbow has two female threads for joining pipes and other components. This fitting has been manufactured from galvanised malleable iron, designed to be durable, high ductility and corrosion resistant. Please note: When measuring be sure to minus approximately ¼&rdq..
    Ex Tax: £16.71 £20.05
  • 2.1/2" Galvanised 90 Elbow MxF
    This galvanised 90 degree elbow has one male thread and one female thread for joining pipes and other components. This fitting has been manufactured from galvanised malleable iron, designed to be durable, high ductility and corrosion resistant. Please note: When measuring be sure to minus approxi..
    Ex Tax: £23.01 £27.61
  • 2.1/2" Galvanised Barrel Nipples MxM
    This galvanised barrel nipple has two male threads for joining pipes and other components. This fitting has been manufactured from galvanised malleable iron, designed to be durable, high ductility and corrosion resistant. Please note: When measuring be sure to minus approximately ¼” ..
    Ex Tax: £16.10 £19.32
  • 2.1/2" Galvanised Cross FxFxFxF
    This galvanised cross has four female threads for joining pipes and other components. This fitting has been manufactured from galvanised malleable iron, designed to be durable, high ductility and corrosion resistant. Please note: When measuring be sure to minus approximately ¼” to fi..
    Ex Tax: £39.72 £47.66
  • 2.1/2" Galvanised Elbow 45 FxF
    This galvanised 45 degree elbow has two female threads for joining pipes and other components. This fitting has been manufactured from galvanised malleable iron, designed to be durable, high ductility and corrosion resistant. Please note: When measuring be sure to minus approximately ¼&rdq..
    Ex Tax: £36.14 £43.37
  • 2.1/2" Galvanised Equal Tee FxFxF
    This galvanised equal tee has three female threads for joining pipes and other components. This fitting has been manufactured from galvanised malleable iron, designed to be durable, high ductility and corrosion resistant. Please note: When measuring be sure to minus approximately ¼” ..
    Ex Tax: £25.47 £30.56
  • 2.1/2" Galvanised Flanged Plug
    This galvanised flanged plug has one male thread for joining pipes and other components. This fitting has been manufactured from galvanised malleable iron, designed to be durable, high ductility and corrosion resistant. Please note: When measuring be sure to minus approximately ¼” to..
    Ex Tax: £7.86 £9.43
  • 2.1/2" Galvanised Hex Cap
    This galvanised hex cap can be used for joining pipes and other components. This fitting has been manufactured from galvanised malleable iron, designed to be durable, high ductility and corrosion resistant. Please note: When measuring be sure to minus approximately ¼” to find the BSP..
    Ex Tax: £10.14 £12.17
  • 2.1/2" Galvanised Hex Nipples
    This galvanised hex nipples has two male threads for joining pipes and other components. This fitting has been manufactured from galvanised malleable iron, designed to be durable, high ductility and corrosion resistant. Please note: When measuring be sure to minus approximately ¼” to..
    Ex Tax: £10.14 £12.17
  • 2.1/2" Galvanised Plain Plug
    This galvanised plain plug has one male thread for joining pipes and other components. This fitting has been manufactured from galvanised malleable iron, designed to be durable, high ductility and corrosion resistant. Please note: When measuring be sure to minus approximately ¼” to f..
    Ex Tax: £10.30 £12.36
  • 2.1/2" Galvanised Sockets FxF
    This galvanised socket has two female threads for joining pipes and other components. This fitting has been manufactured from galvanised malleable iron, designed to be durable, high ductility and corrosion resistant. Please note: When measuring be sure to minus approximately ¼” to fi..
    Ex Tax: £11.91 £14.29
  • 2.1/2" Galvanised Straight Union FxF
    This galvanised straight union has two female threads for joining pipes and other components. This fitting has been manufactured from galvanised malleable iron, designed to be durable, high ductility and corrosion resistant. Please note: When measuring be sure to minus approximately ¼&rdqu..
    Ex Tax: £39.72 £47.66
  • 2.1/2" Galvanised Straight Union MxF
    This galvanised straight union has one female thread and one male thread for joining pipes and other components. This fitting has been manufactured from galvanised malleable iron, designed to be durable, high ductility and corrosion resistant. Please note: When measuring be sure to minus approxim..
    Ex Tax: £46.71 £56.05
  • 2.1/2" Galvanised Union Elbow FxF
    This galvanised 45 degree union elbow has two female threads for joining pipes and other components. This fitting has been manufactured from galvanised malleable iron, designed to be durable, high ductility and corrosion resistant. Please note: When measuring be sure to minus approximately &frac1..
    Ex Tax: £53.28 £63.94
  • 2.1/2" Galvanised Union Elbow MxF
    This galvanised 45 degree union elbow has one male thread and one female thread for joining pipes and other components. This fitting has been manufactured from galvanised malleable iron, designed to be durable, high ductility and corrosion resistant. Please note: When measuring be sure to minus a..
    Ex Tax: £58.62 £70.34
  • 21/2 X 1" Galvanised Hex Bush
    This galvanised hex bush has one female thread and one male thread for joining pipes and other components. This fitting has been manufactured from galvanised malleable iron, designed to be durable, high ductility and corrosion resistant. Please note: When measuring be sure to minus approximately ..
    Ex Tax: £8.76 £10.51
  • 21/2 X 1.1/2" Galvanised Hex Bush
    Malleable fittings are manufactured in accordance with pipe threads DIN 2999, NEN 325. Please contact us for details, if you require piping...
    Ex Tax: £8.76 £10.51
  • 21/2 X 1.1/2" Galvanised Reduced Sockets FxF
    This galvanised reduced socket has two female threads for joining pipes and other components. This fitting has been manufactured from galvanised malleable iron, designed to be durable, high ductility and corrosion resistant. Please note: When measuring be sure to minus approximately ¼&rdqu..
    Ex Tax: £12.66 £15.19
  • 21/2 X 1.1/4" Galvanised Hex Bush
    Malleable fittings are manufactured in accordance with pipe threads DIN 2999, NEN 325. Please contact us for details, if you require piping...
    Ex Tax: £8.76 £10.51